Package Modelica.​Fluid.​Dissipation
Functions for convective heat transfer and pressure loss characteristics

Information

FD2

Library description

This library contains convective heat transfer and pressure loss functions written in Modelica®. Generally the pressure loss calculations are based on incompressible fluids and total pressure difference. For devices with non changing cross sectional area, the calculated total pressure loss is equal to the static pressure difference. Geodetic pressure loss is not considered throughout the library. The functions supplied may be used separately.

The library is a non-commercial product of XRG Simulation GmbH.

Acknowledgements

The following people contributed to the Fluid.Dissipation library (alphabetical list): Jörg Eiden, Ole Engel, Nina Peci, Sven Rutkowski, Thorben Vahlenkamp, Stefan Wischhusen.

The development of the Fluid.Dissipation library was founded within the ITEA research project EuroSysLib-D by German Federal Ministry of Education and Research (promotional reference 01IS07022B). The project was started in October 2007 and ended in June 2010.

Copyright © 2007-2018, Modelica Association and contributors

Contact

XRG Simulation GmbH
Harburger Schlossstraße 6-12
21079 Hamburg
Germany

info@xrg-simulation.de

Extends from Modelica.​Icons.​BasesPackage (Icon for packages containing base classes).

Package Contents

NameDescription
HeatTransferPackage for calculation of heat transfer
PressureLossPackage for calculation of pressure loss
UsersGuideUser's guide
UtilitiesPackage for utilities (should not be used directly)

Generated 2018-12-12 12:13:37 EST by MapleSim.