.Modelica.Blocks.Interfaces.Adaptors.PotentialToFlowAdaptor

Information

Adaptor between a physical connector and a signal representation of the connector signals. This component is used to provide a pure signal interface around a physical model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit).

This adaptor has potential, optional 1st derivative of potential, and optional 2nd derivative of potential as input and flow, optional 1st derivative of flow, and optional 2nd derivative of flow as output signals.

Note, the input signals must be consistent to each other (pder=der(p), pder2=der(pder)).