This partial model provides a conditional heat port for
dissipating losses.
- If useHeatPort is set to
false (default), no heat port is available, and
the thermal loss power is dissipated internally. In this case, the
parameter T specifies the fixed device temperature
(the default for T = 20°C)
- If useHeatPort is set to
true, the heat port is available.
If this model is used, the internalHeatPort has
to be connected in the model which inherits from
PartialElementaryConditionalHeatPort model. The device temperature
internalHeatPort.T can be used to describe the
influence of the device temperature on the model behaviour.
Generated at 2020-06-05T21:39:08Z by OpenModelica 1.16.0~dev-442-g2e5bc9f