Test example: Permanent magnet DC machine started with
current controller
The current controller is parameterized according to absolute
optimum. At time 0.1 s a reference current step with height =
nominal armature current is applied, causing the DC machine to
start, and accelerating inertias.
The machine is loaded by a quadratic speed dependent load
torque.
Simulate for 2 seconds and plot (versus time):
- dcpm.ia: armature current
- dcpm.wMechanical: motor's speed
- dcpm.tauElectrical: motor's torque
Default machine parameters of model DC_PermanentMagnet are
used.
Generated at 2020-06-05T21:39:08Z by OpenModelica 1.16.0~dev-442-g2e5bc9f
.Modelica.Electrical.Machines.Examples.DCMachines.DCPM_CurrentControlled