.Modelica.Electrical.Spice3.Internal.Mos2.mos2RenameParametersDev

Information

This function mos2RenameParametersDev assigns the external (given by the user) device parameters to the internal parameters. It also does the analysis of the IsGiven values (level 2).

Interface

function mos2RenameParametersDev
  extends Modelica.Icons.Function;
  input Spice3.Internal.ModelcardMOS2 ex;
  input Integer mtype;
  input SI.Length W "Width of channel region";
  input SI.Length L "Length of channel region";
  input SI.Area AD "Area of drain diffusion";
  input SI.Area AS "Area of source diffusion";
  input SI.Length PD "Drain perimeter";
  input SI.Length PS "Source perimeter";
  input Real NRD "Length of drain squares";
  input Real NRS "Length of Source squares";
  input Integer OFF "Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet";
  input Real IC "Initial condition values, not implemented yet";
  input Modelica.Units.NonSI.Temperature_degC TEMP "Temperature";
  output Spice3.Internal.Mosfet.Mosfet dev "Output record Mosfet";
end mos2RenameParametersDev;