.Modelica.Mechanics.MultiBody.Parts.Rotor1D

Information

This component is used to model the gyroscopic torques exerted by a 1-dim. inertia (so called rotor) on its 3-dim. carrier body. Gyroscopic torques appear, if the vector of the carrier body's angular velocity is not parallel to the vector of the rotor's axis. The axis of rotation of the rotor is defined by the parameter n, which has to be given in the local coordinate system of frame_a. The default animation of this component is shown in the figure below.

This component is a replacement for Modelica.Mechanics.Rotational.Components.Inertia for the case, that a 1-dim.-rotational mechanical system should be attached with a 3-dim. carrier body.

The Boolean parameter exact was introduced due to performance reasons. If exact is set to false, the influence of the carrier body motion on the angular velocity of the rotor is neglected. This influence is usually negligible if the 1-dim.-rotational mechanical system accelerates much faster as the base body (this is, e.g., the case in vehicle powertrains). The essential advantage is that an algebraic loop is removed since then there is only an action on acceleration level from the powertrain to the base body but not vice versa.

Reference
Schweiger, Christian ; Otter, Martin: Modelling 3D Mechanical Effects of 1-dim. Powertrains. In: Proceedings of the 3rd International Modelica Conference. Linköping : The Modelica Association and Linköping University, November 3-4, 2003, pp. 149-158

Contents

Name	Description
RotorWith3DEffects	1D inertia attachable on 3-dim. bodies (3D dynamic effects are taken into account)