.Modelica.Mechanics.Translational.Components.GeneralPositionToForceAdaptor

Information

Adaptor between a flange connector and a signal representation of the flange. This component is used to provide a pure signal interface around a Translational model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit). Examples of the usage of this adaptor are provided in Translational.Examples.GenerationOfFMUs. This adaptor has position, velocity and acceleration as input signals and force as output signal.

Note, the input signals must be consistent to each other (v=der(s), a=der(v)).