.Modelica.Units.NonSI

Information

This package provides predefined types, such as Angle_deg (angle in degree), AngularVelocity_rpm (angular velocity in revolutions per minute) or Temperature_degF (temperature in degree Fahrenheit), which are in common use but are not part of the international standard on units according to ISO 31-1992 "General principles concerning quantities, units and symbols" and ISO 1000-1992 "SI units and recommendations for the use of their multiples and of certain other units".

If possible, the types in this package should not be used. Use instead types of package Modelica.Units.SI. For more information on units, see also the book of Francois Cardarelli Scientific Unit Conversion - A Practical Guide to Metrication (Springer 1997).

Contents

Name Description
Temperature_degC Absolute temperature in degree Celsius (for relative temperature use Modelica.Units.SI.TemperatureDifference)
Temperature_degF Absolute temperature in degree Fahrenheit (for relative temperature use Modelica.Units.SI.TemperatureDifference)
Temperature_degRk Absolute temperature in degree Rankine (for relative temperature use Modelica.Units.SI.TemperatureDifference)
Angle_deg Angle in degree
AngularVelocity_rpm Angular velocity in revolutions per minute. Alias unit names that are outside of the SI system: rpm, r/min, rev/min
Velocity_kmh Velocity in kilometres per hour
Time_day Time in days
Time_hour Time in hours
Time_minute Time in minutes
Volume_litre Volume in litres
ElectricCharge_Ah Electric charge in Ampere hours
Energy_Wh Energy in Watt hours
Energy_kWh Energy in kilo watt hours
Pressure_bar Absolute pressure in bar
MassFlowRate_gps Mass flow rate in gram per second
Area_cm Area in cm
PerArea_cm Per Area in cm
Area_cmPerVoltageSecond Area in cm per voltage second

Generated at 2020-06-05T21:39:08Z by OpenModelica 1.16.0~dev-442-g2e5bc9f