.Modelica.Blocks.Math.Atan2

Information

This blocks computes the output y as the tangent-inverse of the input u1 divided by input u2:

    y = atan2( u1, u2 );

u1 and u2 shall not be zero at the same time instant. Atan2 uses the sign of u1 and u2 in order to construct the solution in the range -180 deg ≤ y ≤ 180 deg, whereas block Atan gives a solution in the range -90 deg ≤ y ≤ 90 deg.

atan2.png


Generated at 2020-06-05T07:38:22Z by OpenModelica 1.16.0~dev-420-gc007a39