.Modelica.Blocks.Tables.CombiTable1D

Information

Univariate constant, linear or cubic Hermite spline interpolation in one dimension of a table. Via parameter columns it can be defined how many columns of the table are interpolated. If, e.g., columns={2,4}, it is assumed that 2 input and 2 output signals are present and that the first output interpolates the first input via column 2 and the second output interpolates the second input via column 4 of the table matrix.

The grid points and function values are stored in a matrix "table[i,j]", where the first column "table[:,1]" contains the grid points and the other columns contain the data to be interpolated. Example:

   table = [0,  0;
            1,  1;
            2,  4;
            4, 16]
   If, e.g., the input u = 1.0, the output y =  1.0,
       e.g., the input u = 1.5, the output y =  2.5,
       e.g., the input u = 2.0, the output y =  4.0,
       e.g., the input u =-1.0, the output y = -1.0 (i.e., extrapolation).

• The interpolation interval is found by a binary search where the interval used in the last call is used as start interval.
• Via parameter smoothness it is defined how the data is interpolated:

    smoothness = 1: Linear interpolation
               = 2: Akima interpolation: Smooth interpolation by cubic Hermite
                    splines such that der(y) is continuous, also if extrapolated.
               = 3: Constant segments
               = 4: Fritsch-Butland interpolation: Smooth interpolation by cubic
                    Hermite splines such that y preserves the monotonicity and
                    der(y) is continuous, also if extrapolated.
               = 5: Steffen interpolation: Smooth interpolation by cubic Hermite
                    splines such that y preserves the monotonicity and der(y)
                    is continuous, also if extrapolated.
  

• Values outside of the table range, are computed by extrapolation according to the setting of parameter extrapolation:

    extrapolation = 1: Hold the first or last value of the table,
                       if outside of the table scope.
                  = 2: Extrapolate by using the derivative at the first/last table
                       points if outside of the table scope.
                       (If smoothness is LinearSegments or ConstantSegments
                       this means to extrapolate linearly through the first/last
                       two table points.).
                  = 3: Periodically repeat the table data (periodical function).
                  = 4: No extrapolation, i.e. extrapolation triggers an error
  

• If the table has only one row, the table value is returned, independent of the value of the input signal.
• The grid values (first column) have to be strictly increasing.

The table matrix can be defined in the following ways:

1. Explicitly supplied as parameter matrix "table", and the other parameters have the following values:

      tableName is "NoName" or has only blanks,
      fileName  is "NoName" or has only blanks.
   

2. Read from a file "fileName" where the matrix is stored as "tableName". Both text and MATLAB MAT-file format is possible. (The text format is described below). The MAT-file format comes in four different versions: v4, v6, v7 and v7.3. The library supports at least v4, v6 and v7 whereas v7.3 is optional. It is most convenient to generate the MAT-file from FreeMat or MATLAB® by command

      save tables.mat tab1 tab2 tab3
   

   or Scilab by command

      savematfile tables.mat tab1 tab2 tab3
   

   when the three tables tab1, tab2, tab3 should be used from the model.
   Note, a fileName can be defined as URI by using the helper function loadResource.
3. Statically stored in function "usertab" in file "usertab.c". The matrix is identified by "tableName". Parameter fileName = "NoName" or has only blanks. Row-wise storage is always to be preferred as otherwise the table is reallocated and transposed. See the Tables package documentation for more details.

When the constant "NO_FILE_SYSTEM" is defined, all file I/O related parts of the source code are removed by the C-preprocessor, such that no access to files takes place.

If tables are read from a text file, the file needs to have the following structure ("-----" is not part of the file content):

-----------------------------------------------------
#1
double tab1(5,2)   # comment line
  0   0
  1   1
  2   4
  3   9
  4  16
double tab2(5,2)   # another comment line
  0   0
  2   2
  4   8
  6  18
  8  32
-----------------------------------------------------

Note, that the first two characters in the file need to be "#1" (a line comment defining the version number of the file format). Afterwards, the corresponding matrix has to be declared with type (= "double" or "float"), name and actual dimensions. Finally, in successive rows of the file, the elements of the matrix have to be given. The elements have to be provided as a sequence of numbers in row-wise order (therefore a matrix row can span several lines in the file and need not start at the beginning of a line). Numbers have to be given according to C syntax (such as 2.3, -2, +2.e4). Number separators are spaces, tab (\t), comma (,), or semicolon (;). Several matrices may be defined one after another. Line comments start with the hash symbol (#) and can appear everywhere. Text files should either be ASCII or UTF-8 encoded, where UTF-8 encoded strings are only allowed in line comments and an optional UTF-8 BOM at the start of the text file is ignored. Other characters, like trailing non comments, are not allowed in the file.

MATLAB is a registered trademark of The MathWorks, Inc.