.Modelica.Electrical.Machines.Examples.AsynchronousInductionMachines.AIMS_Start

Information

At start time tStart1 three phase voltage is supplied to the asynchronous induction machine with sliprings; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed, using a starting resistance. At time tStart2 external rotor resistance is shortened, finally reaching nominal speed.

Simulate for 1.5 seconds and plot (versus time):

Default machine parameters are used.


Generated at 2020-06-05T07:38:22Z by OpenModelica 1.16.0~dev-420-gc007a39