.Modelica.Electrical.Machines.Examples.DCMachines.DCPM_CurrentControlled

Information

Test example: Permanent magnet DC machine started with current controller
The current controller is parameterized according to absolute optimum. At time 0.1 s a reference current step with height = nominal armature current is applied, causing the DC machine to start, and accelerating inertias.
The machine is loaded by a quadratic speed dependent load torque.
Simulate for 2 seconds and plot (versus time): Default machine parameters of model DC_PermanentMagnet are used.
Generated at 2020-06-05T07:38:22Z by OpenModelica 1.16.0~dev-420-gc007a39