.Modelica.Electrical.Machines.Examples.DCMachines.DCSE_Start

Information

Test example: Series excited DC machine started with a series resistor
At constant source voltage, a series resistor limiting the armature current, is reduced according to a ramp, causing the DC machine to start, and accelerating inertias against load torque quadratic dependent on speed, finally reaching nominal speed.
Simulate for 2 seconds and plot (versus time): Default machine parameters of model DC_SeriesExcited are used.
Generated at 2020-06-05T07:38:22Z by OpenModelica 1.16.0~dev-420-gc007a39