.Modelica.Thermal.FluidHeatFlow.Sensors

Information

This package contains sensors:

• PressureSensor: absolute pressure
• TemperatureSensor: absolute temperature (Kelvin)
• RelPressureSensor: pressure drop between flowPort_a and flowPort_b
• RelTemperatureSensor: temperature difference between flowPort_a and flowPort_b
• MassFlowSensor: measures mass flow rate
• VolumeFlowSensor: measures volume flow rate
• EnthalpyFlowSensor: measures enthalpy flow rate

Some of the sensors do not need access to medium properties for measuring, but it is necessary to define the medium in the connector (check of connections). Thermodynamic equations are defined in partial models (package Interfaces.Partials). All sensors are considered massless, they do not change mass flow or enthalpy flow.

Contents

Name	Description
PressureSensor	Absolute pressure sensor
TemperatureSensor	Absolute temperature sensor
RelPressureSensor	Pressure difference sensor
RelTemperatureSensor	Temperature difference sensor
MassFlowSensor	Mass flow sensor
VolumeFlowSensor	Volume flow sensor
EnthalpyFlowSensor	Enthalpy flow sensor