.Modelica.Thermal.HeatTransfer.Components.ThermalConductor

Information

This is a model for transport of heat without storing it; see also: ThermalResistor. It may be used for complicated geometries where the thermal conductance G (= inverse of thermal resistance) is determined by measurements and is assumed to be constant over the range of operations. If the component consists mainly of one type of material and a regular geometry, it may be calculated, e.g., with one of the following equations:

• Conductance for a box geometry under the assumption that heat flows along the box length:

      G = k*A/L
      k: Thermal conductivity (material constant)
      A: Area of box
      L: Length of box
      

• Conductance for a cylindrical geometry under the assumption that heat flows from the inside to the outside radius of the cylinder:

      G = 2*pi*k*L/log(r_out/r_in)
      pi   : Modelica.Constants.pi
      k    : Thermal conductivity (material constant)
      L    : Length of cylinder
      log  : Modelica.Math.log;
      r_out: Outer radius of cylinder
      r_in : Inner radius of cylinder
      

    Typical values for k at 20 degC in W/(m.K):
      aluminium   220
      concrete      1
      copper      384
      iron         74
      silver      407
      steel        45 .. 15 (V2A)
      wood         0.1 ... 0.2