Modelica.Blocks.Routing

Library of blocks to combine and extract signals

Information

This package contains blocks to combine and extract signals.

Extends from Modelica.Icons.Package (Icon for standard packages).

Package Content

Name	Description
Replicator	Signal replicator
IntegerReplicator	Integer signal replicator
BooleanReplicator	Boolean signal replicator
ExtractSignal	Extract signals from an input signal vector
Extractor	Extract scalar signal out of signal vector dependent on IntegerRealInput index
Multiplex	Multiplexer block for arbitrary number of input connectors
Multiplex2	Multiplexer block for two input connectors
Multiplex3	Multiplexer block for three input connectors
Multiplex4	Multiplexer block for four input connectors
Multiplex5	Multiplexer block for five input connectors
Multiplex6	Multiplexer block for six input connectors
DeMultiplex	DeMultiplexer block for arbitrary number of output connectors
DeMultiplex2	DeMultiplexer block for two output connectors
DeMultiplex3	DeMultiplexer block for three output connectors
DeMultiplex4	DeMultiplexer block for four output connectors
DeMultiplex5	DeMultiplexer block for five output connectors
DeMultiplex6	DeMultiplexer block for six output connectors
RealPassThrough	Pass a Real signal through without modification
IntegerPassThrough	Pass a Integer signal through without modification
BooleanPassThrough	Pass a Boolean signal through without modification

Modelica.Blocks.Routing.Replicator

Signal replicator

Information

This block replicates the input signal to an array of nout identical output signals.

Extends from Modelica.Blocks.Interfaces.SIMO (Single Input Multiple Output continuous control block).

Parameters

Connectors

Modelica.Blocks.Routing.IntegerReplicator

Integer signal replicator

Information

This block replicates the Integer input signal to an array of nout identical Integer output signals.

Extends from Modelica.Blocks.Icons.IntegerBlock (Basic graphical layout of Integer block).

Parameters

Connectors

Modelica.Blocks.Routing.BooleanReplicator

Boolean signal replicator

Information

This block replicates the Boolean input signal to an array of nout identical Boolean output signals.

Extends from Modelica.Blocks.Icons.BooleanBlock (Basic graphical layout of Boolean block).

Parameters

Connectors

Modelica.Blocks.Routing.ExtractSignal

Extract signals from an input signal vector

Information

Extract signals from the input connector and transfer them to the output connector.

The extracting scheme is given by the integer vector 'extract'. This vector specifies, which input signals are taken and in which order they are transferred to the output vector. Note, that the dimension of 'extract' has to match the number of outputs. Additionally, the dimensions of the input connector signals and the output connector signals have to be explicitly defined via the parameters 'nin' and 'nout'.

Example:

     nin = 7 "Number of inputs";
     nout = 4 "Number of outputs";
     extract[nout] = {6,3,3,2} "Extracting vector";

extracts four output signals (nout=4) from the seven elements of the input vector (nin=7):

   output no. 1 is set equal to input no. 6
   output no. 2 is set equal to input no. 3
   output no. 3 is set equal to input no. 3
   output no. 4 is set equal to input no. 2

Extends from Modelica.Blocks.Interfaces.MIMO (Multiple Input Multiple Output continuous control block).

Parameters

Connectors

Modelica.Blocks.Routing.Extractor

Extract scalar signal out of signal vector dependent on IntegerRealInput index

Information

This block extracts a scalar output signal out the vector of input signals dependent on the Integer value of the additional u index:

    y = u [ index ] ;

where index is an additional Integer input signal.

Extends from Modelica.Blocks.Interfaces.MISO (Multiple Input Single Output continuous control block).

Parameters

Connectors

Modelica.Blocks.Routing.Multiplex

Multiplexer block for arbitrary number of input connectors

Information

The output connector is the concatenation of the input connectors.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Modelica.Blocks.Routing.Multiplex2

Multiplexer block for two input connectors

Information

The output connector is the concatenation of the two input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1 and n2.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.Multiplex3

Multiplexer block for three input connectors

Information

The output connector is the concatenation of the three input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1, n2 and n3.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.Multiplex4

Multiplexer block for four input connectors

Information

The output connector is the concatenation of the four input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1, n2, n3 and n4.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.Multiplex5

Multiplexer block for five input connectors

Information

The output connector is the concatenation of the five input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1, n2, n3, n4 and n5.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.Multiplex6

Multiplexer block for six input connectors

Information

The output connector is the concatenation of the six input connectors. Note, that the dimensions of the input connector signals have to be explicitly defined via parameters n1, n2, n3, n4, n5 and n6.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.DeMultiplex

DeMultiplexer block for arbitrary number of output connectors

Information

The input connector is split up into output connectors.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Connectors

Modelica.Blocks.Routing.DeMultiplex2

DeMultiplexer block for two output connectors

Information

The input connector is split up into two output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1 and n2.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.DeMultiplex3

DeMultiplexer block for three output connectors

Information

The input connector is split into three output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1, n2 and n3.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.DeMultiplex4

DeMultiplexer block for four output connectors

Information

The input connector is split into four output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1, n2, n3 and n4.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.DeMultiplex5

DeMultiplexer block for five output connectors

Information

The input connector is split into five output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1, n2, n3, n4 and n5.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.DeMultiplex6

DeMultiplexer block for six output connectors

Information

The input connector is split into six output connectors. Note, that the dimensions of the output connector signals have to be explicitly defined via parameters n1, n2, n3, n4, n5 and n6.

Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).

Parameters

Connectors

Modelica.Blocks.Routing.RealPassThrough

Pass a Real signal through without modification

Information

Passes a Real signal through without modification. Enables signals to be read out of one bus, have their name changed and be sent back to a bus.

Extends from Modelica.Blocks.Interfaces.SISO (Single Input Single Output continuous control block).

Connectors

Modelica.Blocks.Routing.IntegerPassThrough

Pass a Integer signal through without modification

Information

Passes a Integer signal through without modification. Enables signals to be read out of one bus, have their name changed and be sent back to a bus.

Extends from Modelica.Blocks.Icons.IntegerBlock (Basic graphical layout of Integer block).

Connectors

Modelica.Blocks.Routing.BooleanPassThrough

Pass a Boolean signal through without modification

Information

Passes a Boolean signal through without modification. Enables signals to be read out of one bus, have their name changed and be sent back to a bus.

Extends from Modelica.Blocks.Interfaces.BooleanSISO (Single Input Single Output control block with signals of type Boolean).

Connectors