Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces

Interfaces for AC singlephase models

Information

This package contains connector specifications and partial models for more complex components.

Extends from Modelica.Icons.InterfacesPackage (Icon for packages containing interfaces).

Package Content

Name	Description
Pin	Quasi-static single-phase pin
PositivePin	Positive quasi-static single-phase pin
NegativePin	Negative quasi-static single-phase pin
TwoPin	Two pins
OnePort	Two pins, current through
AbsoluteSensor	Partial potential sensor
RelativeSensor	Partial voltage / current sensor
Source	Partial voltage / current source

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.Pin

Quasi-static single-phase pin

Information

The potential of this connector is the complex voltage and the flow variable is the complex current. The positive and negative pin are derived from this base connector.

See also

PositivePin, NegativePin, Plug, PositivePlug, NegativePlug

Contents

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.PositivePin

Positive quasi-static single-phase pin

Information

The positive pin is based on Pin. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of the quasi stationary voltage and current. The symbol is also designed such way to look different than the negative pin.

See also

Pin, NegativePin, Plug, PositivePlug, NegativePlug

Extends from Pin (Quasi-static single-phase pin).

Contents

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.NegativePin

Negative quasi-static single-phase pin

Information

The negative pin is based on Pin. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of the quasi stationary voltage and current. The symbol is also designed such way to look different than the positive pin.

See also

Pin, PositivePin, Plug, PositivePlug, NegativePlug

Extends from Pin (Quasi-static single-phase pin).

Contents

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.TwoPin

Two pins

Information

This partial model uses a positive and negative pin and defines the complex voltage difference as well as the complex current (into the positive pin). Additionally, the angular velocity of the quasi stationary system is explicitly defined as variable. This model is mainly intended to be used with graphical representation of user models.

See also

PositivePin, NegativePin, OnePort

Connectors

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.OnePort

Two pins, current through

Information

This partial model is based on TwoPin and additionally considers the complex current balance of the positive and the negative pin. This model is intended to be used with textual representation of user models.

See also

PositivePin, NegativePin, TwoPin

Extends from TwoPin (Two pins).

Connectors

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.AbsoluteSensor

Partial potential sensor

Information

The absolute sensor partial model provides a single positive pin to measure the complex voltage. Additionally this model contains a proper icon and a definition of the angular velocity.

See also

RelativeSensor, PotentialSensor, MultiPhase.Interfaces.AbsoluteSensor, MultiPhase.Interfaces.RelativeSensor

Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device).

Connectors

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.RelativeSensor

Partial voltage / current sensor

Information

The relative sensor partial model relies on the OnePort to measure the complex voltage, current or power. Additionally this model contains a proper icon and a definition of the angular velocity.

See also

AbsoluteSensor, VoltageSensor, CurrentSensor, PowerSensor, MultiPhase.Interfaces.AbsoluteSensor, MultiPhase.Interfaces.RelativeSensor

Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device), OnePort (Two pins, current through).

Connectors

Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces.Source

Partial voltage / current source

Information

The source partial model relies on the OnePort and contains a proper icon.

See also

VoltageSource, VariableVoltageSource, CurrentSource, VariableCurrentSource, MultiPhase.Interfaces.Source.

Extends from OnePort (Two pins, current through).

Connectors