Additional components for drum boiler example
Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).
Name | Description |
---|---|
EquilibriumDrumBoiler | Simple Evaporator with two states, see Astroem, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378 |
Simple Evaporator with two states, see Astroem, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378
Model of a simple evaporator with two states. The model assumes two-phase equilibrium inside the component; saturated steam goes out of the steam outlet.
References: Åström, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378
Extends from Modelica.Fluid.Interfaces.PartialTwoPort (Partial component with two ports).
Name | Description |
---|---|
replaceable package Medium | Medium in the component |
m_D | mass of surrounding drum metal [kg] |
cp_D | specific heat capacity of drum metal [J/(kg.K)] |
V_t | total volume inside drum [m3] |
Assumptions | |
allowFlowReversal | = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
Dynamics | |
energyDynamics | Formulation of energy balance |
massDynamics | Formulation of mass balance |
Initialization | |
p_start | Start value of pressure [Pa] |
V_l_start | Start value of liquid volumeStart value of volume [m3] |
Name | Description |
---|---|
replaceable package Medium | Medium in the component |
port_a | Fluid connector a (positive design flow direction is from port_a to port_b) |
port_b | Fluid connector b (positive design flow direction is from port_a to port_b) |
heatPort | |
V | liquid volume [m3] |