This package contains basic space phasor models.
Real and imaginary part of voltage space phasor are the potentials v_[2] of the space phasor connector; (implicit grounded).
Real and imaginary part of current space phasor are the currents i_[2] at the space phasor connector;
a ground has to be used where necessary for currents flowing back.
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
Rotator | Rotates space phasor |
SpacePhasor | Physical transformation: three phase <-> space phasors |
Physical transformation of voltages and currents: three phases <-> space phasors:
x[k] = X0 + {cos(-(k - 1)/m*2*pi),-sin(-(k - 1)/m*2*pi)}*X[Re,Im]
and vice versa:
X0 = sum(x[k])/m
X[Re,Im] = sum(2/m*{cos((k - 1)/m*2*pi),sin((k - 1)/m*2*pi)}*x[k])
were x designates three phase values, X[Re,Im] designates the space phasor and X0 designates the zero sequence system.
Physical transformation means that both voltages and currents are transformed in both directions.
Zero-sequence voltage and current are present at pin zero. An additional zero-sequence impedance could be connected between pin zero and pin ground.
| Type | Name | Default | Description |
|---|---|---|---|
Real | turnsRatio | 1 | Turns ratio |
| Type | Name | Description |
|---|---|---|
PositivePlug | plug_p | |
NegativePlug | plug_n | |
PositivePin | zero | |
NegativePin | ground | |
SpacePhasor | spacePhasor |
Rotates space phasors of left connector to right connector by the angle provided by the input signal "angle" from one coordinate system into another.
| Type | Name | Description |
|---|---|---|
SpacePhasor | spacePhasor_a | |
SpacePhasor | spacePhasor_b | |
input RealInput | angle |
Generated 2018-12-12 12:10:14 EST by MapleSim.