This package contains utility functions and records for the ThickEdgedOrifice fitting component.
Extends from Modelica.Icons.Package (Icon for standard packages).
| Name | Description |
|---|---|
Choices … | Choices for Geometry |
Geometry | Geometric data for a thick edged orifice |
massFlowRate | Return mass flow rate m_flow as function of pressure loss dp for a thick edged orifice |
pressureLoss | Return pressure loss dp as function of mass flow rate m_flow for a thick edged orifice |
This function returns the mass flow rate m_flow as function of pressure loss dp for a thick edged orifice. The details of the function are described here.
The orifice characteristic is valid for constant density and constant dynamic viscosity. It can be approximately also used for compressible media. This is performed by providing the upstream density and upstream dynamic viscosity. In order to be able to regularize density and dynamic viscosity around zero mass flow rate, the two quantities have to be given if fluid flows from port_a to port_b (d_a, eta_a) and if fluid flows from port_b to port_a (d_b, eta_b).
Extends from Modelica.Icons.Function (Icon for functions).
| Type | Name | Description |
|---|---|---|
Pressure | dp | Pressure loss |
Geometry | geometry | Geometry of bend |
Density | d_a | Density at port_a when fluid is flowing from port_a to port_b |
Density | d_b | Density at port_b when fluid is flowing from port_b to port_a |
DynamicViscosity | eta_a | Dynamic viscosity at port_a when fluid is flowing from port_a to port_b |
DynamicViscosity | eta_b | Dynamic viscosity at port_b when fluid is flowing from port_b to port_a |
AbsolutePressure | dp_small | Small pressure drop used for regularization if m_flow=f(...,dp_small,..,dp) |
MassFlowRate | m_flow_small | Small mass flow rate used for regularization if dp=f_inv(...,m_flow_small,m_flow) |
| Type | Name | Description |
|---|---|---|
MassFlowRate | m_flow | Mass flow rate (= port_a.m_flow) |
This function returns the pressure loss dp as function of mass flow rate m_flow for a thick edged orifice. The details of the function are described here.
The orifice characteristic is valid for constant density and constant dynamic viscosity. It can be approximately also used for compressible media. This is performed by providing the upstream density and upstream dynamic viscosity. In order to be able to regularize density and dynamic viscosity around zero mass flow rate, the two quantities have to be given if fluid flows from port_a to port_b (d_a, eta_a) and if fluid flows from port_b to port_a (d_b, eta_b).
Extends from Modelica.Icons.Function (Icon for functions).
| Type | Name | Description |
|---|---|---|
MassFlowRate | m_flow | Mass flow rate (= port_a.m_flow) |
Geometry | geometry | Geometry of bend |
Density | d_a | Density at port_a when fluid is flowing from port_a to port_b |
Density | d_b | Density at port_b when fluid is flowing from port_b to port_a |
DynamicViscosity | eta_a | Dynamic viscosity at port_a when fluid is flowing from port_a to port_b |
DynamicViscosity | eta_b | Dynamic viscosity at port_b when fluid is flowing from port_b to port_a |
AbsolutePressure | dp_small | Small pressure drop used for regularization if m_flow=f(...,dp_small,..,dp) |
MassFlowRate | m_flow_small | Small mass flow rate used for regularization if dp=f_inv(...,m_flow_small,m_flow) |
| Type | Name | Description |
|---|---|---|
Pressure | dp | Pressure loss |
This record is used to define the geometric (constant) data of a thick edged orifice. The details of the record are described here.
Extends from Modelica.Icons.Record (Icon for records).
| Type | Name | Description |
|---|---|---|
Area | crossArea | Inner cross sectional area |
Length | perimeter | Inner perimeter |
Area | venaCrossArea | Cross sectional area of vena contraction |
Length | venaPerimeter | Perimeter of vena contraction |
Length | venaLength | Length of vena contraction |
Generated 2018-12-12 12:13:28 EST by MapleSim.