Package Modelica.Fluid.Sources.BaseClasses
Base classes used in the Sources package (only of interest to build new component models)

This icon shall be used for a package/library that contains base models and classes, respectively.

Extends from Modelica.Icons.BasesPackage (Icon for packages containing base classes).

Name	Description
`PartialFlowSource`	Partial component source with one fluid connector
`PartialSource`	Partial component source with one fluid connector

Partial Model Modelica.Fluid.Sources.BaseClasses.PartialSource
Partial component source with one fluid connector

Partial component to model the volume interface of a source component, such as a mass flow source. The essential features are:

The pressure in the connection port (= ports.p) is identical to the pressure in the volume.
The outflow enthalpy rate (= port.h_outflow) and the composition of the substances (= port.Xi_outflow) are identical to the respective values in the volume.

Type	Name	Default	Description
`Integer`	`nPorts`	`0`	Number of ports

Type	Name	Description
`FluidPorts_b`	`ports[nPorts]`

Partial component to model the volume interface of a source component, such as a mass flow source. The essential features are:

The pressure in the connection port (= ports.p) is identical to the pressure in the volume.
The outflow enthalpy rate (= port.h_outflow) and the composition of the substances (= port.Xi_outflow) are identical to the respective values in the volume.

Type	Name	Default	Description
`Integer`	`nPorts`	`0`	Number of ports

Type	Name	Description
`FluidPort_b`	`ports[nPorts]`

Generated 2018-12-12 12:13:28 EST by MapleSim.