This icon indicates a package that contains executable examples.
Extends from Modelica.Icons.ExamplesPackage (Icon for packages containing runnable examples).
| Name | Description |
|---|---|
RealFFT1 | Example demonstrating the use of an FFT calculation during simulation (and storing both amplitudes and phases on file) |
RealFFT2 | Example demonstrating the use of an FFT calculation during simulation (and storing only amplitudes on file) |
In this example the signal y
y = 5 + 3*sin(2*pi*f1) + 1.5*cos(2*pi*f2)
is sampled and an FFT is computed from the sampled signal (default: f1 = 2 Hz, f2 = 3 Hz). In the public part the FFT is stored up to f_max (internally in the protected part the FFT is stored up to 5*f_max). With the default values for f_max (= 4 Hz) and f_resolution (= 0.2 Hz), the following results are achieved:
fi[0] = 0, Ai[0] = 5; // mean value of signal fi[11] = 2, Ai[11] = 3; // frequency/amplitude of sine fi[16] = 3, Ai[16] = 1.5; // frequency/amplitude of cosine
A plot of the resulting FFT is shown in the next image:
Note, phases of small amplitudes (= smaller as 0.0001*maximalAmplitude) are explicitly set to zero, since the corresponding "phase" is numerical noise (and would just be confusing). Furthermore, note that the FFT phases are with respect to a cos(..) signal.
Extends from Modelica.Icons.Example (Icon for runnable examples).
| Type | Name | Default | Description |
|---|---|---|---|
Frequency | f_max | 4 | Maximum frequency of interest |
Frequency | f_resolution | 0.2 | Frequency resolution |
Frequency | f1 | 2 | Frequency of sine |
Frequency | f2 | 3 | Frequency of cosine |
String | FFT_resultFileName | "RealFFT1_resultFFT.mat" | File where FFT will be stored as [f,A,Phi], with f in {Hz] and A the amplitudes and Phi the phases in [rad] |
final Integer | nfi | max(1, min(integer(ceil(f_max / f_resolution)) + 1, nf)) | Number of frequency points of the interested frequency range (only up to f_max) |
Frequency | fi[nfi] | FFT frequencies of interested frequency points |
This is the same example as Examples.RealFFT1 with the only difference that just the amplitudes of the FFT are stored on file (but not the phases).
Extends from Modelica.Icons.Example (Icon for runnable examples).
| Type | Name | Default | Description |
|---|---|---|---|
Frequency | f_max | 4 | Maximum frequency of interest |
Frequency | f_resolution | 0.2 | Frequency resolution |
Frequency | f1 | 2 | Frequency of sine |
Frequency | f2 | 3 | Frequency of cosine |
String | FFT_resultFileName | "RealFFT2_resultFFT.mat" | File where FFT will be stored as [f,A,Phi], with f in {Hz] and A the amplitues and Phi the phases in [rad] |
final Integer | nfi | max(1, min(integer(ceil(f_max / f_resolution)) + 1, nf)) | Number of frequency points of the interested frequency range (only up to f_max) |
Frequency | fi[nfi] | FFT frequencies of interested frequency points |
Generated 2018-12-12 12:14:35 EST by MapleSim.