Extends from Modelica.Icons.FunctionsPackage
(Icon for packages containing functions).
Name | Description |
---|---|
cond_dTp | Thermal conductivity lam(d,T,p) (industrial use version) only in one-phase region |
surfaceTension | Surface tension in region 4 between steam and water |
visc_dTp | Dynamic viscosity eta(d,T,p), industrial formulation |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature (K) |
Pressure | p | Pressure (only needed for region of validity) |
Integer | phase | 2 for two-phase, 1 for one-phase, 0 if not known |
Type | Name | Description |
---|---|---|
DynamicViscosity | eta | Dynamic viscosity |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature (K) |
Pressure | p | Pressure |
Integer | phase | 2 for two-phase, 1 for one-phase, 0 if not known |
Boolean | industrialMethod | If true, the industrial method is used, otherwise the scientific one |
Type | Name | Description |
---|---|---|
ThermalConductivity | lambda | Thermal conductivity |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Temperature | T | Temperature (K) |
Type | Name | Description |
---|---|---|
SurfaceTension | sigma | Surface tension in SI units |
Generated 2018-12-12 12:14:31 EST by MapleSim.