IntegerInput'input Integer' as connector |
![]() |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Connector with one input signal of type Integer.
![]() |
Modelica.Blocks.Interaction.Show Show Integer value from numberPort or from number input field in diagram layer dynamically |
![]() |
Modelica.Blocks.Interfaces Integer Input Boolean Output continuous control block |
![]() |
Modelica.Blocks.Interfaces Multiple Integer Input Multiple Boolean Output continuous control block with same number of inputs and outputs |
![]() |
Modelica.Blocks.Interfaces Partial block with a IntegerInput and an IntegerOutput signal |
![]() |
Modelica.Blocks.Interfaces.Adaptors Obsolete block to send Integer signal to bus |
![]() |
Modelica.Blocks.Interfaces.Adaptors Obsolete block to receive Integer signal from bus |
![]() |
Modelica.Blocks.Math Convert Integer to Real signals |
![]() |
Modelica.Blocks.Math Convert Integer to Boolean signal |
![]() |
Modelica.Blocks.MathInteger Add input to previous value of output, if rising edge of trigger port |
![]() |
Modelica.Blocks.Routing Integer signal replicator |
![]() |
Modelica.Blocks.Routing Extract scalar signal out of signal vector dependent on IntegerRealInput index |
![]() |
Modelica.Blocks.Routing Pass a Integer signal through without modification |
![]() |
Modelica.ComplexBlocks.Routing Extract scalar signal out of signal vector dependent on IntegerRealInput index |