IdealClosingSwitchIdeal electrical closer |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The switching behaviour of the ideal closing switch is controlled by the input signal control: off = not control.
For further details, see partial model IdealSwitch.
Parameters (4)
| useHeatPort |
Value: false Type: Boolean Description: =true, if heatPort is enabled |
|---|---|
| T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| Ron |
Value: 1e-5 Type: Resistance (Ω) Description: Closed switch resistance |
| Goff |
Value: 1e-5 Type: Conductance (S) Description: Opened switch conductance |
Connectors (4)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
 |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
 |
control |
Type: BooleanInput Description: true => p--n connected, false => switch open |
Used in Examples (3)
 |
Modelica.Electrical.Analog.Examples Comparison of switch models both with and without arc |
 |
Modelica.Electrical.Machines.Examples.AsynchronousInductionMachines AsynchronousInductionMachineSquirrelCage Steinmetz-connection |
 |
Modelica.Magnetic.FundamentalWave.Examples.BasicMachines Asynchronous induction machine with squirrel cage and Steinmetz-connection |
Used in Components (1)
 |
Modelica.Electrical.MultiPhase.Ideal Multiphase ideal closer |