IdealSemiconductor

Ideal semiconductor

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is an ideal semiconductor which is

open (off), if it is reversed biased (voltage drop less than 0)
closed (on), if it is conducting (current > 0).

This is the behaviour if all parameters are exactly zero.

Note, there are circuits, where this ideal description with zero resistance and zero conductance is not possible. In order to prevent singularities during switching, the opened semiconductor has a small conductance Gon and the closed semiconductor has a low resistance Roff which is default.

The parameter Vknee which is the forward threshold voltage, allows to displace the knee point
along the Gon-characteristic until v = Vknee.

Please note: In case of useHeatPort=true the temperature dependence of the electrical behavior is not modelled.

Parameters (5)

useHeatPort

Value: false

Type: Boolean

Description: =true, if heatPort is enabled

T

Value: 293.15

Type: Temperature (K)

Description: Fixed device temperature if useHeatPort = false

Ron

Value: 1e-5

Type: Resistance (Ω)

Description: Forward state-on differential resistance (closed resistance)

Goff

Value: 1e-5

Type: Conductance (S)

Description: Backward state-off conductance (opened conductance)

Vknee

Value: 0

Type: Voltage (V)

Description: Forward threshold voltage

Connectors (3)

p

Type: PositivePin

Description: Positive electrical pin

n

Type: NegativePin

Description: Negative electrical pin

heatPort

Type: HeatPort_a

Description: Conditional heat port

Extended by (3)

IdealGTOThyristor

Modelica.Electrical.Analog.Ideal

Ideal GTO thyristor

IdealThyristor

Modelica.Electrical.Analog.Ideal

Ideal thyristor

IdealDiode

Modelica.Electrical.Analog.Ideal

Ideal diode