TwoPortComponent with two electrical ports, including current |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
TwoPort is a partial model that consists of two ports. Like OnePort each port has two pins. It is assumed that the current flowing into the positive pin is identical to the current flowing out of pin n. This currents of each port are provided explicitly as currents i1 and i2, the voltages respectively as v1 and v2.
Connectors (4)
 |
p1 |
Type: PositivePin Description: Positive electrical pin of port 1 |
|---|---|---|
 |
n1 |
Type: NegativePin Description: Negative electrical pin of port 1 |
|
p2 |
Type: PositivePin Description: Positive electrical pin of port 2 |
|
n2 |
Type: NegativePin Description: Negative electrical pin of port 2 |
Extended by (11)
 |
Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0 and frequency F |
 |
Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0, frequency F and normalized length NL |
 |
Modelica.Electrical.Analog.Lines Lossless transmission line with characteristic impedance Z0 and transmission delay TD |
 |
Modelica.Electrical.Analog.Ideal Ideal gyrator |
 |
Modelica.Electrical.Analog.Ideal Ideal transformer core with or without magnetization |
 |
Modelica.Electrical.Analog.Basic Linear current-controlled current source |
 |
Modelica.Electrical.Analog.Basic Linear current-controlled voltage source |
 |
Modelica.Electrical.Analog.Basic Linear voltage-controlled current source |
 |
Modelica.Electrical.Analog.Basic Linear voltage-controlled voltage source |
 |
Modelica.Electrical.Analog.Basic Gyrator |
 |
Modelica.Electrical.Analog.Basic Transformer with two ports |