This information is part of the Modelica Standard Library maintained by the Modelica Association.

Conversion of a real input into a digital output without any delay according to:

                                 condition            output
      first check:               input greater upp    lupp
      second check:              input larger low     llow
                                 else                 lmid

If the signal width is greater than 1 this conversion is done for each signal.

n	Value: Type: Integer Description: signal width
upper_limit	Value: Type: Real Description: upper limit
lower_limit	Value: Type: Real Description: lower limit
upper_value	Value: Type: Logic Description: output if input > upper_limit
lower_value	Value: Type: Logic Description: output if input < lower_limit
middle_value	Value: Type: Logic Description: output else