Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Description in VHDL is given by http://www.cs.sfu.ca/~ggbaker/reference/std_logic/src/std_logic_entities.vhd

Truth Table

DataIn	Clock	Reset	Set	DataOut
*	*	*	U	U
*	*	U	*	U
*	*	*	1	1
*	*	1	0	0
*	*	1	X	X
*	*	X	X	X or U
*	*	0	X	X or U or 1 or NC
*	*	X	0	X or U or 0 or NC
*	X-Trns	0	0	X or U or NC
*	1-Trns	0	0	DataIn
*	0-Trns	0	0	NC

  *  = do not care
  ~  = not equal
  U  = L.'U'
  0  = L.'0' or L.'L'
  1  = L.'1' or L.'H'
  X  = L.'X' or L.'W' or L.'Z' or L.'-'
  NC = no change

Clock transition definitions:
  1-Trns: 0 -> 1
  0-Trns: ~ -> 0 or 1 -> * or X -> X|U or U -> X|U
  X-Trns: 0 -> X|U or X|U -> 1

Parameters (4)

tHL	Value: 0 Type: Time (s) Description: High->Low delay
tLH	Value: 0 Type: Time (s) Description: Low->High delay
strength	Value: S.'S_X01' Type: Strength Description: output strength
n	Value: 1 Type: Integer Description: data width