DLATREGSRLLevel sensitive register bank with set and reset, active low |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Description in VHDL is given by http://www.cs.sfu.ca/~ggbaker/reference/std_logic/src/std_logic_entities.vhd
Truth Table
| DataIn | Enable | Reset | Set | DataOut |
| * | * | * | U | U |
| * | * | U | ~0 | U |
| * | * | * | 0 | 1 |
| * | * | 0 | 1 | 0 |
| * | * | 0 | X | X |
| * | U | ~0 | ~0 | U |
| * | ~U | X | X | X or U |
| * | ~U | 1 | X | X or U or 1 or NC |
| * | ~U | X | 1 | X or U or 0 or NC |
| * | X | 1 | 1 | X or U or NC |
| * | 1 | 1 | 1 | DataIn |
| * | 0 | 1 | 1 | NC |
* = do not care ~ = not equal U = L.'U' 0 = L.'0' or L.'L' 1 = L.'1' or L.'H' X = L.'X' or L.'W' or L.'Z' or L.'-' NC = no change
Parameters (4)
Connectors (5)
 |
set |
Type: DigitalInput |
|---|---|---|
|
reset |
Type: DigitalInput |
|
enable |
Type: DigitalInput |
|
dataIn |
Type: DigitalInput[n] |
 |
dataOut |
Type: DigitalOutput[n] |
Components (2)
 |
delay | |
|---|---|---|
 |
dLATSR |
Type: DLATSR |
Used in Examples (1)
 |
Modelica.Electrical.Digital.Examples Level sensitive D-Register-Bank, low active set and reset |