ThermalAmbientTransformerThermal ambient for transformers |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Thermal ambient for transformers to prescribe winding temperatures either constant or via signal connectors. Additionally, all losses = heat flows are recorded.Parameters (3)
| useTemperatureInputs |
Value: false Type: Boolean Description: If true, temperature inputs are used; else, temperatures are constant |
|---|---|
| T1 |
Value: Type: Temperature (K) Description: Temperature of primary windings |
| T2 |
Value: Type: Temperature (K) Description: Temperature of secondary windings |
Outputs (4)
| Q_flow1 |
Default Value: temperature1.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of primary windings |
|---|---|
| Q_flow2 |
Default Value: temperature2.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of secondary windings |
| Q_flowCore |
Default Value: temperatureCore.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of core losses |
| Q_flowTotal |
Default Value: Q_flow1 + Q_flow2 + Q_flowCore Type: HeatFlowRate (W) |
Connectors (3)
 |
thermalPort |
Type: ThermalPortTransformer |
|---|---|---|
 |
TPrimary |
Type: RealInput Description: Temperature of primary windings |
|
TSecondary |
Type: RealInput Description: Temperature of secondary windings |
Components (7)
 |
temperature1 |
Type: PrescribedTemperature |
|---|---|---|
 |
constT1 |
Type: Constant |
|
temperature2 |
Type: PrescribedTemperature |
|
constT2 |
Type: Constant |
 |
temperatureCore |
Type: FixedTemperature |
 |
thermalCollector1 |
Type: ThermalCollector |
|
thermalCollector2 |
Type: ThermalCollector |
Used in Components (2)
 |
Modelica.Electrical.Machines.Interfaces Partial model of three-phase transformer |
 |
Modelica.Electrical.QuasiStationary.Machines.Interfaces Partial model of three-phase transformer |