HalfControlledBridge2mPulse

2*m pulse half controlled rectifier bridge

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

General information about AC/DC converters can be found at the AC/DC converter concept

This is a 2*m pulse half controlled rectifier bridge. In order to operate this rectifier a voltage source with center tap is required. The circuit topology is the same as in Examples.ACDC.RectifierBridge2mPulse. It is important to note that for multi phase circuits with even phase numbers greater than three the MultiStarResistance shall be used for grounding the voltage sources.

Parameters (11)

useHeatPort	Value: false Type: Boolean Description: =true, if heatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false
useConstantEnable	Value: true Type: Boolean Description: true = disabled boolean input, use constantEnable
constantEnable	Value: true Type: Boolean Description: Constant enabling of firing signals
RonDiode	Value: 1e-05 Type: Resistance (Ω) Description: Closed diode resistance
GoffDiode	Value: 1e-05 Type: Conductance (S) Description: Opened diode conductance
VkneeDiode	Value: 0 Type: Voltage (V) Description: Diode forward threshold voltage
RonThyristor	Value: 1e-05 Type: Resistance (Ω) Description: Closed thyristor resistance
GoffThyristor	Value: 1e-05 Type: Conductance (S) Description: Opened thyristor conductance
VkneeThyristor	Value: 0 Type: Voltage (V) Description: Thyristor forward threshold voltage
offStart_p	Value: fill(true, m) Type: Boolean[m] Description: Boolean start value of variable thyristor_p[:].off

Connectors (6)

	ac	Type: PositivePlug Description: AC input
	dc_p	Type: PositivePin Description: Positive DC output
	dc_n	Type: NegativePin Description: Negative DC output
	heatPort	Type: HeatPort_a Description: Conditional heat port
	fire_p	Type: BooleanInput[m] Description: Firing signals of positive potential transistors
	enable	Type: BooleanInput Description: Enables fire and notFire

Components (8)

	andCondition_p	Type: And[m] Description: And condition for m positive firing signals
	enableLogic	Type: EnableLogic Description: Enabling logic
	star_p	Type: Star
	star_n	Type: Star
	thyristor_p	Type: IdealThyristor Description: Thyristors connected to positive DC potential
	diode_n	Type: IdealDiode Description: Diodes connected to negative DC potential
	thermalCollector	Type: ThermalCollector
	pre	Type: Pre[m]

Used in Examples (1)

HalfControlledBridge2mPulse

Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse

2*m pulse half controlled rectifier bridge with resistive load