ThyristorCenterTap2mPulse2*m pulse thyristor rectifier with center tap |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
General information about AC/DC converters can be found at the AC/DC converter concept
This is a 2*m pulse thyristor rectifier with center tap. In order to operate this rectifier a voltage source with center tap is required. The center tap has to be connected with the negative pin of the load. See example Examples.ACDC.RectifierCenterTap2mPulse.
Parameters (9)
| useHeatPort |
Value: false Type: Boolean Description: =true, if heatPort is enabled |
|---|---|
| T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| useConstantEnable |
Value: true Type: Boolean Description: true = disabled boolean input, use constantEnable |
| constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
| RonThyristor |
Value: 1e-05 Type: Resistance (Ω) Description: Closed thyristor resistance |
| GoffThyristor |
Value: 1e-05 Type: Conductance (S) Description: Opened thyristor conductance |
| VkneeThyristor |
Value: 0 Type: Voltage (V) Description: Thyristor forward threshold voltage |
| offStart_p |
Value: fill(true, m) Type: Boolean[m] Description: Boolean start value of variable thyristor_p[:].off |
| offStart_n |
Value: fill(true, m) Type: Boolean[m] Description: Boolean start value of variable thyristor_n[:].off |
Connectors (7)
 |
ac_p |
Type: PositivePlug Description: Positive potential AC input |
|---|---|---|
 |
ac_n |
Type: NegativePlug Description: Negative potential AC input |
 |
dc_p |
Type: PositivePin Description: Positive DC output |
 |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
 |
fire_p |
Type: BooleanInput[m] Description: Firing signals of positive potential transistors |
|
enable |
Type: BooleanInput Description: Enables fire and notFire |
|
fire_n |
Type: BooleanInput[m] Description: Firing signals of negative potential transistors |
Components (8)
 |
andCondition_p |
Type: And[m] Description: And condition for m positive firing signals |
|---|---|---|
 |
enableLogic |
Type: EnableLogic Description: Enabling logic |
|
andCondition_n |
Type: And[m] Description: And condition for m negative firing signals |
 |
thyristor_p |
Type: IdealThyristor Description: Thyristors conducting positive plug AC potentials |
|
thyristor_n |
Type: IdealThyristor Description: Thyristors conducting negative plug AC potentials |
 |
star_p |
Type: Star |
|
star_n |
Type: Star |
 |
thermalCollector |
Type: ThermalCollector |
Used in Components (1)
 |
Modelica.Electrical.PowerConverters.Examples.ACDC.ExampleTemplates Template of 2*m pulse thyristor rectifier with center tap |