Enable2Partial model providing enable parameter and optional enable input for two firing signals |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides the enabling logic for two firing signal.
Parameters (2)
| useConstantEnable |
Value: true Type: Boolean Description: true = disabled boolean input, use constantEnable |
|---|---|
| constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
Connectors (3)
 |
enable |
Type: BooleanInput Description: Enables fire and notFire |
|---|---|---|
|
fire_p |
Type: BooleanInput Description: Firing signal of positive potential transistor |
|
fire_n |
Type: BooleanInput Description: Firing signal of negative potential transistor |
Components (3)
 |
enableLogic |
Type: EnableLogic Description: Enabling logic |
|---|---|---|
 |
andCondition_p |
Type: And Description: And condition for positive firing signal |
|
andCondition_n |
Type: And Description: And condition for negative firing signal |
Extended by (5)
 |
Modelica.Electrical.PowerConverters.DCDC H bridge (four quadrant converter) |
 |
Modelica.Electrical.PowerConverters.DCAC Single phase DC to AC converter |
 |
Modelica.Electrical.PowerConverters.ACDC Two pulse thyristor rectifier with center tap |
 |
Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz half controlled rectifier bridge |
 |
Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz thyristor rectifier bridge |