IdealOpeningSwitchMultiphase ideal opener |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Contains m ideal opening switches (Modelica.Electrical.QuasiStationary.SinglePhase.Ideal.IdealOpeningSwitch).
Use with care: This switch is only intended to be used for structural changes, not fast switching sequences, due to the quasistationary formulation.
Parameters (5)
| mh |
Value: m Type: Integer Description: Number of heatPorts=number of phases |
|---|---|
| useHeatPort |
Value: false Type: Boolean Description: =true, if all heat ports are enabled |
| T |
Value: fill(293.15, m) Type: Temperature[mh] (K) Description: Fixed device temperatures if useHeatPort = false |
| Ron |
Value: Type: Resistance[m] (Ω) Description: Closed switch resistance |
| Goff |
Value: Type: Conductance[m] (S) Description: Opened switch conductance |
Connectors (4)
 |
plug_p |
Type: PositivePlug Description: Positive quasi-static polyphase plug |
|---|---|---|
 |
plug_n |
Type: NegativePlug Description: Negative quasi-static polyphase plug |
 |
heatPort |
Type: HeatPort_a[mh] Description: Conditional heat ports |
 |
control |
Type: BooleanInput[m] Description: true => switch open, false => p--n connected |
Components (5)
 |
v |
Type: ComplexVoltage[m] Description: Complex voltage |
|---|---|---|
 |
i |
Type: ComplexCurrent[m] Description: Complex current |
 |
plugToPins_p |
Type: PlugToPins_p |
 |
plugToPins_n |
Type: PlugToPins_n |
 |
idealOpeningSwitch |
Type: IdealOpeningSwitch[m] |