mos2RenameParametersDevDevice parameter renaming to internal names |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This function mos2RenameParameters assigns the external (given by the user) device parameters to the internal parameters. It also does the analysis of the IsGiven values (level 2).
Syntax
Inputs (13)
| ex |
Type: ModelcardMOS2 |
|---|---|
| mtype |
Type: Integer |
| W |
Type: Length (m) Description: Width of channel region |
| L |
Type: Length (m) Description: Length of channel region |
| AD |
Type: Area (m²) Description: Area of drain diffusion |
| AS |
Type: Area (m²) Description: Area of source diffusion |
| PD |
Type: Length (m) Description: Drain perimeter |
| PS |
Type: Length (m) Description: Source perimeter |
| NRD |
Type: Real Description: Length of drain squares |
| NRS |
Type: Real Description: Length of Source squares |
| OFF |
Type: Integer Description: Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet |
| IC |
Type: Real Description: Initial condition values, not implemented yet |
| TEMP |
Type: Temp_C (°C) Description: Temperature |
Outputs (1)
| dev |
Type: Mosfet Description: Output record Mosfet |
|---|