mosfetRenameParametersDevDevice parameter renaming to internal names |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This function mos1RenameParametersDev assigns the external (given by the user) device parameters to the internal parameters. It also does the analysis of the IsGiven values (level 1).
Syntax
Inputs (14)
| W |
Type: Length (m) Description: Channel Width |
|---|---|
| L |
Type: Length (m) Description: Channel Length |
| AD |
Type: Area (m²) Description: Area of the drain diffusion |
| AS |
Type: Area (m²) Description: Area of the source diffusion |
| PD |
Type: Length (m) Description: Perimeter of the drain junction |
| PS |
Type: Length (m) Description: Perimeter of the source junction |
| NRD |
Type: Real Description: Number of squares of the drain diffusions |
| NRS |
Type: Real Description: Number of squares of the source diffusions |
| OFF |
Type: Integer Description: Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet |
| IC_VDS |
Type: Voltage (V) Description: Initial condition value VDS, not implemented yet |
| IC_VGS |
Type: Voltage (V) Description: Initial condition value VGS, not implemented yet |
| IC_VBS |
Type: Voltage (V) Description: Initial condition value VBS, not implemented yet |
| UIC |
Type: Boolean Description: Use initial condition, UIC |
| TEMP |
Type: Temp_C (°C) Description: Temperature |
Outputs (1)
| dev |
Type: Mosfet Description: Output record Mosfet |
|---|