Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

In modelcards, that are typical for SPICE3, the so called technology parameters are stored. These parameters are usually set for more than one semiconductor device in a circuit, e.g., the temperature of a whole electrical circuit.

Technology parameters of the semiconductor resistor model

Parameters (6)

TC1	Value: 0.0 Type: LinearTemperatureCoefficientResistance (Ω/K) Description: First order temperature coefficient
TC2	Value: 0.0 Type: QuadraticTemperatureCoefficientResistance (Ω/K²) Description: Second order temperature coefficient
RSH	Value: -1e40 Type: Resistance (Ω) Description: Sheet resistance
TNOM	Value: -1e40 Type: Temp_C (°C) Description: Parameter measurement temperature, default 27
DEFW	Value: 1e-5 Type: Length (m) Description: Default device width
NARROW	Value: 0 Type: Length (m) Description: Narrowing of resistor due to side etching