generalGeneral cross section |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Function that returns the ThickEdgedOrifice.Geometry for a general cross section of the orifice.
Syntax
geometry = general(crossArea, perimeter, venaCrossArea, venaPerimeter, venaLength)
Inputs (5)
| crossArea |
Type: Area (m²) Description: Inner cross sectional area |
|---|---|
| perimeter |
Type: Length (m) Description: Inner perimeter |
| venaCrossArea |
Type: Area (m²) Description: Cross sectional area of vena contraction |
| venaPerimeter |
Type: Length (m) Description: Perimeter of vena contraction |
| venaLength |
Type: Length (m) Description: Length of vena contraction |
Outputs (1)
| geometry |
Type: Geometry Description: Geometry of circular thick edged orifice |
|---|