MassFlowRateIdeal sensor for mass flow rate |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This component monitors the mass flow rate flowing from port_a to port_b. The sensor is ideal, i.e., it does not influence the fluid.
Parameters (3)
| allowFlowReversal |
Value: system.allowFlowReversal Type: Boolean Description: = true to allow flow reversal, false restricts to design direction (port_a -> port_b) |
|---|---|
| m_flow_nominal |
Value: system.m_flow_nominal Type: MassFlowRate (kg/s) Description: Nominal value of m_flow = port_a.m_flow |
| m_flow_small |
Value: if system.use_eps_Re then system.eps_m_flow * m_flow_nominal else system.m_flow_small Type: MassFlowRate (kg/s) Description: Regularization for bi-directional flow in the region |m_flow| < m_flow_small (m_flow_small > 0 required) |
Connectors (3)
 |
port_a |
Type: FluidPort_a Description: Fluid connector a (positive design flow direction is from port_a to port_b) |
|---|---|---|
 |
port_b |
Type: FluidPort_b Description: Fluid connector b (positive design flow direction is from port_a to port_b) |
 |
m_flow |
Type: RealOutput Description: Mass flow rate from port_a to port_b |
Components (1)
 |
system |
Type: System Description: System wide properties |
|---|
Used in Examples (2)
 |
Modelica.Fluid.Examples Simple model of a heating system |
 |
Modelica.Fluid.Examples.DrumBoiler Complete drum boiler model, including evaporator and supplementary components |