PartialFlowSourcePartial component source with one fluid connector |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Partial component to model the volume interface of a source component, such as a mass flow source. The essential features are:
- The pressure in the connection port (= ports.p) is identical to the pressure in the volume.
- The outflow enthalpy rate (= port.h_outflow) and the composition of the substances (= port.Xi_outflow) are identical to the respective values in the volume.
Parameters (1)
| nPorts |
Value: 0 Type: Integer Description: Number of ports |
|---|
Connectors (1)
 |
ports |
Type: FluidPort_b[nPorts] |
|---|
Components (1)
 |
medium |
Type: BaseProperties Description: Medium in the source |
|---|
Extended by (2)
 |
Modelica.Fluid.Sources Ideal flow source that produces a prescribed mass flow with prescribed specific enthalpy, mass fraction and trace substances |
 |
Modelica.Fluid.Sources Ideal flow source that produces a prescribed mass flow with prescribed temperature, mass fraction and trace substances |