This information is part of the Modelica Standard Library maintained by the Modelica Association.

This partial model provides a conditional heating port for the connection to a thermal network.

• If useHeatPort is set to false (default), no heat port is available, and the thermal loss power flows internally to the ground. In this case, the parameter T specifies the fixed device temperature (the default for T = 20^oC).
• If useHeatPort is set to true, a heat port is available.

If this model is used, the loss power has to be provided by an equation in the model which inherits from ConditionalHeatingPort model (lossPower = ...). As device temperature T_heatPort can be used to describe the influence of the device temperature on the model behaviour.

useHeatPort	Value: false Type: Boolean Description: =true, if HeatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false