PartialTwoPortsPartial component with magnetic potential difference between two magnetic ports p and n and magnetic flux Phi from p to n |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
It is assumed that the magnetic flux flowing into port_p
is identical to the flux flowing out of port_n.
Connectors (2)
 |
port_p |
Type: PositiveMagneticPort Description: Positive quasi-static magnetic port |
|---|---|---|
 |
port_n |
Type: NegativeMagneticPort Description: Negative quasi-static magnetic port |
Components (2)
 |
V_m |
Type: ComplexMagneticPotentialDifference Description: Magnetic potential difference of both ports |
|---|---|---|
 |
Phi |
Type: ComplexMagneticFlux Description: Magnetic flux from port_p to port_n |
Extended by (8)
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Interfaces Partial magnetic voltage or flux sensor |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Interfaces Base class for leakage flux tubes with position-independent permeance and hence no force generation; mu_r=1 |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Interfaces Base class for flux tubes with fixed shape during simulation; linear or non-linear material characteristics |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Basic Short cut branch |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Basic Idle running branch |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Basic For modelling of eddy current in a conductive magnetic flux tube |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Basic Constant permeance |
 |
Modelica.Magnetic.QuasiStatic.FluxTubes.Basic Constant reluctance |