temperature_psCompute temperature from pressure and specific enthalpy |
 |
Syntax
T = temperature_ps(p, s, phase, region)
Inputs (4)
| p |
Type: AbsolutePressure (Pa) Description: Pressure |
|---|---|
| s |
Type: SpecificEntropy (J/(kg·K)) Description: Specific entropy |
| phase |
Default Value: 0 Type: FixedPhase Description: 2 for two-phase, 1 for one-phase, 0 if not known |
| region |
Default Value: Region Type: Integer Description: If 0, region is unknown, otherwise known and this input |
Outputs (1)
| T |
Type: Temperature (K) Description: Temperature |
|---|