Temperature_degC (degC) Absolute temperature in degree Celsius (for relative temperature use SIunits.TemperatureDifference)
	Temperature_degF (degF) Absolute temperature in degree Fahrenheit (for relative temperature use SIunits.TemperatureDifference)
	Temperature_degRk (degRk) Absolute temperature in degree Rankine (for relative temperature use SIunits.TemperatureDifference)
	Angle_deg (deg) Angle in degree
	AngularVelocity_rpm (rev/min) Angular velocity in revolutions per minute. Alias unit names that are outside of the SI system: rpm, r/min, rev/min
	Velocity_kmh (km/h) Velocity in kilometres per hour
	Time_day (d) Time in days
	Time_hour (h) Time in hours
	Time_minute (min) Time in minutes
	Volume_litre (l) Volume in litres
	ElectricCharge_Ah (A.h) Electric charge in Ampere hours
	Energy_Wh (W.h) Energy in Watt hours
	Energy_kWh (kW.h) Energy in kilo watt hours
	Pressure_bar (bar) Absolute pressure in bar
	MassFlowRate_gps (g/s) Mass flow rate in gram per second
	FirstOrderTemperaturCoefficient (Ohm/degC) Obsolete type, use LinearTemperatureCoefficientResistance instead!
	SecondOrderTemperaturCoefficient (Ohm/degC2) Obsolete type, use QuadraticTemperatureCoefficientResistance instead!
	Area_cm (cm2) Area in cm
	PerArea_cm (1/cm2) Per Area in cm
	Area_cmPerVoltageSecond (cm2/(V.s)) Area in cm per voltage second

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This package provides predefined types, such as Angle_deg (angle in degree), AngularVelocity_rpm (angular velocity in revolutions per minute) or Temperature_degF (temperature in degree Fahrenheit), which are in common use but are not part of the international standard on units according to ISO 31-1992 "General principles concerning quantities, units and symbols" and ISO 1000-1992 "SI units and recommendations for the use of their multiples and of certain other units".

If possible, the types in this package should not be used. Use instead types of package Modelica.SIunits. For more information on units, see also the book of Francois Cardarelli Scientific Unit Conversion - A Practical Guide to Metrication (Springer 1997).

Some units, such as Temperature_degC/Temp_C are both defined in Modelica.SIunits and in Modelica.Conversions.NonSIunits. The reason is that these definitions have been placed erroneously in Modelica.SIunits although they are not SIunits. For backward compatibility, these type definitions are still kept in Modelica.SIunits.