Modelica.Electrical.Spice3.Internal.Mos2

Records and functions for MOSFETs level 2

Information

This package Mos2 contains functions and records with data of the MOSFET model level 2.

Extends from Modelica.Icons.InternalPackage (Icon for an internal package (indicating that the package should not be directly utilized by user)).

Package Content

Name	Description
Mos2ModelLineParams	Record for Mosfet model line parameters (for level 2)
Mos2ModelLineVariables	Record for Mosfet model line variables (for level 2)
Mos2Calc	Further MOSFET variables (for level 2)
mos2ModelLineParamsInitEquationsRevised	Initial precalculation
drainCurRevised	Drain current calculation
mos2RenameParametersRevised	Parameter renaming to internal names
mos2RenameParametersDev	Device parameter renaming to internal names

Modelica.Electrical.Spice3.Internal.Mos2.Mos2ModelLineParams

Record for Mosfet model line parameters (for level 2)

Information

This record Mos1ModelLineParams contains the model line parameters that are used for the MOSFET transistors level 2 in SPICE3.

Extends from Spice3.Internal.Mos.MosModelLineParams (Record for Mosfet model line parameters (for level 1, 2, 3 and 6)).

Parameters

Name	Description
Initialization
m_jctSatCurDensity	JS, Bulk jct. sat. current density, input - use tSatCurDens
m_sheetResistance	RSH, Sheet resistance [Ohm]
m_bulkJctPotential	PB, Bulk junction potential, input - use tBulkPot
m_bulkJctBotGradingCoeff	MJ, Bottom grading coefficient [1/K]
m_gateSourceOverlapCapFactor	CGS0, Gate-source overlap cap
m_gateDrainOverlapCapFactor	CGD0, Gate-drain overlap cap
m_gateBulkOverlapCapFactor	CGB0, Gate-bulk overlap cap
m_fNcoef	KF, Flicker noise coefficient
m_fNexp	AF, Flicker noise exponent
m_oxideCapFactor
m_vt0	VTO, Threshold voltage [V]
m_capBD	CBD, B-D junction capacitance [F]
m_capBS	CBS, B-S junction capacitance [F]
m_bulkCapFactor	CJ, Bottom junction cap per area [F/m2]
m_sideWallCapFactor	CJSW, Side grading coefficient [F/m]
m_fwdCapDepCoeff	FC, Forward bias junction fit parameter
m_phi	PHI, Surface potential [V]
m_gamma	GAMMA, Bulk threshold parameter [V]
m_substrateDoping	NSUB, Substrate doping
m_gateType	TPG, Gate type
m_surfaceStateDensity	NSS, Gate type [1/cm2]
m_surfaceStateDensityIsGiven	surfaceStateDensityIsGivenValue
m_surfaceMobility	UO, Surface mobility [cm2/(V.s)]
m_latDiff	LD, Lateral diffusion [m]
m_jctSatCur	IS, Bulk junction sat. current [A]
m_drainResistance	RD, Drain ohmic resistance [Ohm]
m_sourceResistance	RS, Source ohmic resistance [Ohm]

Modelica.Electrical.Spice3.Internal.Mos2.Mos2ModelLineVariables

Record for Mosfet model line variables (for level 2)

Information

This record MosModelLineVariables contains the model line variables that are used for the MOSFET transistors level 2 SPICE3.

Extends from Spice3.Internal.Mos.MosModelLineVariables (Record for Mosfet model line variables (for level 1)).

Modelica.Electrical.Spice3.Internal.Mos2.Mos2Calc

Further MOSFET variables (for level 2)

Information

This record Mos1Calc contains further MOSFET variables (for level 2) that are needed for the calculations.

Extends from Spice3.Internal.Mos.MosCalc (Further MOSFET variables (for level 1, 2, 3 and 6)).

Parameters

Name	Description
Initialization
m_mode	Mode
m_tTransconductance	[A/V2]
m_tSurfMob	[cm2/(V.s)]
m_tPhi	[V]
m_tVto	[V]
m_tSatCurDens	[A/m2]
m_tDrainSatCur	[A]
m_tSourceSatCur	[A]
m_tCBDb	[F]
m_tCBDs	[F]
m_tCBSb	[F]
m_tCBSs	[F]
m_tCj	[F/m2]
m_tCjsw	[F/m]
m_tBulkPot	[V]
m_tDepCap	[V]
m_tVbi	[V]
m_VBScrit	[V]
m_VBDcrit	[V]
m_f1b	[V]
m_f2b
m_f3b
m_f1s	[V]
m_f2s
m_f3s
m_dVt	[V]
m_capgd	[F]
m_capgs	[F]
m_capgb	[F]
m_qgs	[C]
m_qgd	[C]
m_qgb	[C]

Modelica.Electrical.Spice3.Internal.Mos2.mos2ModelLineParamsInitEquationsRevised

Initial precalculation

Information

This function mos2ModelLineParamsInitEquationsRevised does the initial precalculation of the MOSFET model line parameters for level 2.

Extends from Modelica.Icons.Function (Icon for functions).

Inputs

Name	Description
in_p	Input record model line parameters for MOS2
in_m_type	Type of MOS transistor

Outputs

Name	Description
out_p	Input record model line parameters for MOS2

Modelica.Electrical.Spice3.Internal.Mos2.drainCurRevised

Drain current calculation

Information

This function drainCurRevised calculates the main currents that flows from drain node to source node (level 2).

Extends from Modelica.Icons.Function (Icon for functions).

Inputs

Name	Description
vbs	[V]
vgs	[V]
vds	[V]
in_m	Record MOSFET
in_c	Input record Mos2Calc
in_p	Input record model line parameters for MOS2
in_m_type	Type of MOS transistor

Outputs

Name	Description
out_c	Output record Mos2Calc

Modelica.Electrical.Spice3.Internal.Mos2.mos2RenameParametersRevised

Parameter renaming to internal names

Information

This function mos2RenameParametersRevised assigns the external (given by the user, e.g., RD) technology parameters to the internal parameters (e.g., m_drainResistance). It also does the analysis of the IsGiven values (level 2).

Extends from Modelica.Icons.Function (Icon for functions).

Inputs

Name	Description
ex	Modelcard with technology parameters

Outputs

Name	Description
intern	Output record model line parameters

Modelica.Electrical.Spice3.Internal.Mos2.mos2RenameParametersDev

Device parameter renaming to internal names

Information

This function mos2RenameParametersDev assigns the external (given by the user) device parameters to the internal parameters. It also does the analysis of the IsGiven values (level 2).

Extends from Modelica.Icons.Function (Icon for functions).

Inputs

Name	Description
ex
mtype
W	Width of channel region [m]
L	Length of channel region [m]
AD	Area of drain diffusion [m2]
AS	Area of source diffusion [m2]
PD	Drain perimeter [m]
PS	Source perimeter [m]
NRD	Length of drain squares
NRS	Length of Source squares
OFF	Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet
IC	Initial condition values, not implemented yet
TEMP	Temperature [degC]

Outputs

Name	Description
dev	Output record Mosfet

Automatically generated Thu Oct 1 16:07:48 2020.