Modelica.Magnetic.FluxTubes.Examples.Hysteresis.Components

Components to be used in examples

Information

Extends from Modelica.Icons.Package (Icon for standard packages).

Package Content

Name	Description
Transformer1PhaseWithHysteresis	Single-phase transformer with ferromagnetic core and hysteresis
Transformer3PhaseYyWithHysteresis	Three-phase transformer in Yy configuration

Modelica.Magnetic.FluxTubes.Examples.Hysteresis.Components.Transformer1PhaseWithHysteresis

Single-phase transformer with ferromagnetic core and hysteresis

Information

Simple model of a single-phase transformer with a primary and a secondary winding and a magnetic core. The core is modeled with GenericHystTellinenEverett flux tube elements. Thus, this element considers static and dynamic hysteresis.

Fig. 1: Sketch of the modelled transformer with magnetic core, primary and secondary winding

Extends from Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).

Parameters

Name	Description
Electrical
Primary winding
N1	Primary turns
L1	Mean primary turn length [m]
d1	Wire diameter of primary turns [m]
rho1	Resistivity of primary winding (at 20degC) [Ohm.m]
alpha1	Temperature coefficient of primary turns [1/K]
Secondary winding
N2	Secondary turns
L2	Mean secondary turn length [m]
d2	Wire diameter of secondary turns [m]
rho2	Resistivity of secondary winding (at 20degC) [Ohm.m]
alpha2	Temperature coefficient of secondary turns [1/K]
Core
Geometry
l1	Mean Length l1 of core [m]
l2	Mean Length l2 of core [m]
a	Height of core [m]
b	Width of core [m]
Material
mat	Parameter set of ferromagnetic Hysteresis
Initialization
MagRelStart	Initial magnetization of Core (-1..1)
MagRelFixed	Fixed
HStart	Initial magnetic field strength of Core [A/m]
HFixed	Fixed
I1Start	Initial primary current through winding [A]
I1Fixed	Fixed
Losses and heat
HeatPort
useHeatPort	= true, if HeatPort is enabled
T	Fixed device temperature if useHeatPort = false [K]
Eddy currents
EddyCurrents	Enable eddy currents
sigma	Conductivity of core material [S/m]
t	Thickness of lamination [m]
Leakage
L_l1	Length of leakage of primary Winding [m]
A_l1	Cross section of leakage of primary Winding [m2]
mu_rel1	Constant relative permeability of primary leakage (>0 required)
L_l2	Length of leakage of secondary Winding [m]
A_l2	Cross section of leakage of secondary Winding [m2]
mu_rel2	Constant relative permeability of secondary leakage (>0 required)

Connectors

Modelica.Magnetic.FluxTubes.Examples.Hysteresis.Components.Transformer3PhaseYyWithHysteresis

Three-phase transformer in Yy configuration

Information

Simple model of a three-phase transformer with primary and a secondary windings and a magnetic E-I shaped core. The core is modeled with GenericHystTellinenEverett flux tube elements. Thus, this model considers static and dynamic hysteresis as well as initial flux.

Fig. 1: Sketch of the modelled transformer with magnetic core, primary and secondary winding

Extends from Interfaces.ConditionalHeatPort (Partial model to include a conditional HeatPort in order to describe the power loss via a thermal network).

Parameters

Name	Description
Electrical
Primary winding
N1	Primary turns
L1	Mean primary turn length [m]
d1	Wire diameter of primary turns [m]
rho1	Resistivity of primary winding (at 20degC) [Ohm.m]
alpha1	Temperature coefficient of primary turns [1/K]
Secondary winding
N2	Secondary turns
L2	Mean secondary turn length [m]
d2	Wire diameter of secondary turns [m]
rho2	Resistivity of secondary winding (at 20degC) [Ohm.m]
alpha2	Temperature coefficient of secondary turns [1/K]
Core
Geometry
l1	Mean length l1 of core [m]
l2	Mean length l2 of core [m]
a	Height of core [m]
b	Width of core [m]
Material
mat	Core Material
Initialization
MagRelStart[3]	Initial magnetization of Core (-1..1)
MagRelFixed[3]	Fixed
HStart[3]	Initial magnetic field strength of Core [A/m]
HFixed[3]	Fixed
I1Start[3]	Initial current of primary Windings [A]
I1Fixed[3]	Fixed
I2Start[3]	Initial current of secondary Windings [A]
I2Fixed[3]	Fixed
Losses and heat
HeatPort
useHeatPort	= true, if HeatPort is enabled
T	Fixed device temperature if useHeatPort = false [K]
Eddy currents
EddyCurrents	Enable eddy currents
sigma	Conductivity of core material [S/m]
t	Thickness of lamination [m]
Leakage
L_l1	Length of leakage of primary Winding [m]
A_l1	Cross section of leakage of primary Winding [m2]
mu_rel1	Constant relative permeability of primary leakage (>0 required)
L_l2	Cross section of leakage of secondary Winding [m]
A_l2	Length of leakage of secondary Winding [m2]
mu_rel2	Constant relative permeability of secondary leakage (>0 required)

Connectors