| Name |
Description |
 dynamicViscosity
|
Dynamic viscosity of water |
| thermalConductivity
|
Thermal conductivity of water |
| Inherited |
| state=Modelica.Media.Water.StandardWater.setState_pT(reference_p, reference_T) |
|
| cp_const=Modelica.Media.Water.StandardWater.specificHeatCapacityCp(state) |
Specific heat capacity at constant pressure |
| beta_const=Modelica.Media.Water.StandardWater.isobaricExpansionCoefficient(state) |
Thermal expansion coefficient at constant pressure |
| kappa_const=Modelica.Media.Water.StandardWater.isothermalCompressibility(state) |
Isothermal compressibility |
| MM_const=Modelica.Media.Water.StandardWater.molarMass(state) |
Molar mass |
| reference_d=Modelica.Media.Water.StandardWater.density(state) |
Density in reference conditions |
| reference_h=Modelica.Media.Water.StandardWater.specificEnthalpy(state) |
Specific enthalpy in reference conditions |
| reference_s=Modelica.Media.Water.StandardWater.specificEntropy(state) |
Specific entropy in reference conditions |
| constantJacobian=true |
If true, entries in thermodynamic Jacobian are constant, taken at reference conditions |
 ThermodynamicState
|
A selection of variables that uniquely defines the thermodynamic state |
 BaseProperties
|
Base properties of medium |
 setState_pTX
|
Set the thermodynamic state record from p and T (X not needed) |
| setState_phX
|
Set the thermodynamic state record from p and h (X not needed) |
| setState_psX
|
Set the thermodynamic state record from p and s (X not needed) |
| setState_dTX
|
Set the thermodynamic state record from d and T (X not needed) |
| setSmoothState
|
Return thermodynamic state so that it smoothly approximates: if x > 0 then state_a else state_b |
| pressure
|
Return the pressure from the thermodynamic state |
| temperature
|
Return the temperature from the thermodynamic state |
| density
|
Return the density from the thermodynamic state |
| specificEnthalpy
|
Return the specific enthalpy from the thermodynamic state |
| specificEntropy
|
Return the specific entropy from the thermodynamic state |
| specificInternalEnergy
|
Return the specific internal energy from the thermodynamic state |
 specificGibbsEnergy
|
Return specific Gibbs energy from the thermodynamic state |
| specificHelmholtzEnergy
|
Return specific Helmholtz energy from the thermodynamic state |
| velocityOfSound
|
Return velocity of sound from the thermodynamic state |
| isentropicExponent
|
Return isentropic exponent from the thermodynamic state |
 isentropicEnthalpy
|
Return isentropic enthalpy |
 specificHeatCapacityCp
|
Return specific heat capacity at constant volume |
| specificHeatCapacityCv
|
Return specific heat capacity at constant volume from the thermodynamic state |
| isothermalCompressibility
|
Return the isothermal compressibility kappa |
| isobaricExpansionCoefficient
|
Return the isobaric expansion coefficient |
| density_derp_h
|
Return density derivative w.r.t. pressure at const specific enthalpy |
| density_derh_p
|
Return density derivative w.r.t. specific enthalpy at constant pressure |
| density_derp_T
|
Return density derivative w.r.t. pressure at const temperature |
| density_derT_p
|
Return density derivative w.r.t. temperature at constant pressure |
| density_derX
|
Returns the partial derivative of density with respect to mass fractions at constant pressure and temperature |
| molarMass
|
Return molar mass |
| T_ph
|
Return temperature from pressure and specific enthalpy |
| T_ps
|
Return temperature from pressure and specific entropy |
| setState_pT
|
Return thermodynamic state from p and T |
 setState_ph
|
Return thermodynamic state from p and h |
| setState_ps
|
Return thermodynamic state from p and s |
| setState_dT
|
Return thermodynamic state from d and T |
| density_ph
|
Return density from p and h |
| temperature_ph
|
Return temperature from p and h |
| pressure_dT
|
Return pressure from d and T |
| specificEnthalpy_dT
|
Return specific enthalpy from d and T |
| specificEnthalpy_ps
|
Return specific enthalpy from p and s |
| temperature_ps
|
Return temperature from p and s |
| density_ps
|
Return density from p and s |
| specificEnthalpy_pT
|
Return specific enthalpy from p and T |
| density_pT
|
Return density from p and T |
| ThermoStates=Modelica.Media.Interfaces.Choices.IndependentVariables.pTX |
Enumeration type for independent variables |
| mediumName="Liquid linear water" |
Name of the medium |
| substanceNames={mediumName} |
Names of the mixture substances. Set substanceNames={mediumName} if only one substance. |
| extraPropertiesNames=fill("", 0) |
Names of the additional (extra) transported properties. Set extraPropertiesNames=fill("",0) if unused |
| singleState=false |
= true, if u and d are not a function of pressure |
| reducedX=true |
= true if medium contains the equation sum(X) = 1.0; set reducedX=true if only one substance (see docu for details) |
| fixedX=true |
= true if medium contains the equation X = reference_X |
| reference_p=101325 |
Reference pressure of Medium: default 1 atmosphere |
| reference_T=298.15 |
Reference temperature of Medium: default 25 deg Celsius |
| reference_X=fill(1/nX, nX) |
Default mass fractions of medium |
| p_default=101325 |
Default value for pressure of medium (for initialization) |
| T_default=Modelica.Units.Conversions.from_degC(20) |
Default value for temperature of medium (for initialization) |
| h_default=specificEnthalpy_pTX(p_default, T_default, X_default) |
Default value for specific enthalpy of medium (for initialization) |
| X_default=reference_X |
Default value for mass fractions of medium (for initialization) |
| C_default=fill(0, nC) |
Default value for trace substances of medium (for initialization) |
| nS=size(substanceNames, 1) |
Number of substances |
| nX=nS |
Number of mass fractions |
| nXi=if fixedX then 0 else if reducedX then nS - 1 else nS |
Number of structurally independent mass fractions (see docu for details) |
| nC=size(extraPropertiesNames, 1) |
Number of extra (outside of standard mass-balance) transported properties |
| C_nominal=1.0e-6*ones(nC) |
Default for the nominal values for the extra properties |
 FluidConstants
|
Critical, triple, molecular and other standard data of fluid |
 prandtlNumber
|
Return the Prandtl number |
 heatCapacity_cp
|
Alias for deprecated name |
| heatCapacity_cv
|
Alias for deprecated name |
| beta
|
Alias for isobaricExpansionCoefficient for user convenience |
| kappa
|
Alias of isothermalCompressibility for user convenience |
| specificEnthalpy_pTX
|
Return specific enthalpy from p, T, and X or Xi |
| specificEntropy_pTX
|
Return specific enthalpy from p, T, and X or Xi |
| density_pTX
|
Return density from p, T, and X or Xi |
| temperature_phX
|
Return temperature from p, h, and X or Xi |
| density_phX
|
Return density from p, h, and X or Xi |
| temperature_psX
|
Return temperature from p,s, and X or Xi |
| density_psX
|
Return density from p, s, and X or Xi |
| specificEnthalpy_psX
|
Return specific enthalpy from p, s, and X or Xi |
 MassFlowRate
|
Type for mass flow rate with medium specific attributes |
 AbsolutePressure
|
Type for absolute pressure with medium specific attributes |
| Density
|
Type for density with medium specific attributes |
| DynamicViscosity
|
Type for dynamic viscosity with medium specific attributes |
| EnthalpyFlowRate
|
Type for enthalpy flow rate with medium specific attributes |
| MassFraction
|
Type for mass fraction with medium specific attributes |
| MoleFraction
|
Type for mole fraction with medium specific attributes |
| MolarMass
|
Type for molar mass with medium specific attributes |
| MolarVolume
|
Type for molar volume with medium specific attributes |
| IsentropicExponent
|
Type for isentropic exponent with medium specific attributes |
| SpecificEnergy
|
Type for specific energy with medium specific attributes |
| SpecificInternalEnergy
|
Type for specific internal energy with medium specific attributes |
| SpecificEnthalpy
|
Type for specific enthalpy with medium specific attributes |
| SpecificEntropy
|
Type for specific entropy with medium specific attributes |
| SpecificHeatCapacity
|
Type for specific heat capacity with medium specific attributes |
| SurfaceTension
|
Type for surface tension with medium specific attributes |
| Temperature
|
Type for temperature with medium specific attributes |
| ThermalConductivity
|
Type for thermal conductivity with medium specific attributes |
| PrandtlNumber
|
Type for Prandtl number with medium specific attributes |
| VelocityOfSound
|
Type for velocity of sound with medium specific attributes |
| ExtraProperty
|
Type for unspecified, mass-specific property transported by flow |
| CumulativeExtraProperty
|
Type for conserved integral of unspecified, mass specific property |
| ExtraPropertyFlowRate
|
Type for flow rate of unspecified, mass-specific property |
| IsobaricExpansionCoefficient
|
Type for isobaric expansion coefficient with medium specific attributes |
| DipoleMoment
|
Type for dipole moment with medium specific attributes |
| DerDensityByPressure
|
Type for partial derivative of density with respect to pressure with medium specific attributes |
| DerDensityByEnthalpy
|
Type for partial derivative of density with respect to enthalpy with medium specific attributes |
| DerEnthalpyByPressure
|
Type for partial derivative of enthalpy with respect to pressure with medium specific attributes |
| DerDensityByTemperature
|
Type for partial derivative of density with respect to temperature with medium specific attributes |
| DerTemperatureByPressure
|
Type for partial derivative of temperature with respect to pressure with medium specific attributes |
 SaturationProperties
|
Saturation properties of two phase medium |
| FluidLimits
|
Validity limits for fluid model |
 FixedPhase
|
Phase of the fluid: 1 for 1-phase, 2 for two-phase, 0 for not known, e.g., interactive use |
 Basic
|
The most basic version of a record used in several degrees of detail |
| IdealGas
|
The ideal gas version of a record used in several degrees of detail |
| TwoPhase
|
The two phase fluid version of a record used in several degrees of detail |
Modelica.Media.CompressibleLiquids.LinearWater_pT_Ambient.dynamicViscosity