Modelica.Thermal.HeatTransfer.Sources

Thermal sources

Information

Extends from Modelica.Icons.SourcesPackage (Icon for packages containing sources).

Package Content

Name	Description
FixedTemperature	Fixed temperature boundary condition in Kelvin
PrescribedTemperature	Variable temperature boundary condition in Kelvin
FixedHeatFlow	Fixed heat flow boundary condition
PrescribedHeatFlow	Prescribed heat flow boundary condition

Modelica.Thermal.HeatTransfer.Sources.FixedTemperature

Fixed temperature boundary condition in Kelvin

Information

This model defines a fixed temperature T at its port in Kelvin, i.e., it defines a fixed temperature as a boundary condition.

Parameters

Connectors

Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature

Variable temperature boundary condition in Kelvin

Information

This model represents a variable temperature boundary condition. The temperature in [K] is given as input signal T to the model. The effect is that an instance of this model acts as an infinite reservoir able to absorb or generate as much energy as required to keep the temperature at the specified value.

Connectors

Modelica.Thermal.HeatTransfer.Sources.FixedHeatFlow

Fixed heat flow boundary condition

Information

This model allows a specified amount of heat flow rate to be "injected" into a thermal system at a given port. The constant amount of heat flow rate Q_flow is given as a parameter. The heat flows into the component to which the component FixedHeatFlow is connected, if parameter Q_flow is positive.

If parameter alpha is <> 0, the heat flow is multiplied by (1 + alpha*(port.T - T_ref)) in order to simulate temperature dependent losses (which are given with respect to reference temperature T_ref).

Parameters

Connectors

Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow

Prescribed heat flow boundary condition

Information

This model allows a specified amount of heat flow rate to be "injected" into a thermal system at a given port. The amount of heat is given by the input signal Q_flow into the model. The heat flows into the component to which the component PrescribedHeatFlow is connected, if the input signal is positive.

If parameter alpha is <> 0, the heat flow is multiplied by (1 + alpha*(port.T - T_ref)) in order to simulate temperature dependent losses (which are given with respect to reference temperature T_ref).

Parameters

Connectors