MOMultiple Output continuous control block |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Block has one continuous Real output signal vector.
Parameters (1)
| nout |
Value: 1 Type: Integer Description: Number of outputs |
|---|
Connectors (1)
 |
y |
Type: RealOutput[nout] Description: Connector of Real output signals |
|---|
Extended by (4)
 |
Modelica.Electrical.Machines.Utilities Current controller in dq coordinate system |
 |
Modelica.Electrical.Machines.Utilities Transforms dq to three-phase |
 |
Modelica.Blocks.Sources Table look-up with respect to time and linear/periodic extrapolation methods (data from matrix/file) |
 |
Modelica.Blocks.Sources Move as fast as possible along a distance within given kinematic constraints |